Help me identify old Musket
Help me identify old Musket
32 inch barrel. Front sight is a brass screw, slot still in top....
side of lock 1864, US,AMOSKE....Mfg com, Man.......lr, NH
Barrel has no mark at all on it.
IF its a fowling piece and I need to find a proof mark I"m assuming its the one pin up front by the ?? pewter?? forend cap. Drive out like a TC gun etc...?
Ramrod metal, goes to a point sorta.... convex tip on it for the seater end.
IF its a fowling piece... whtas the value range?
More interesting... forgot I did find a mark on top of the barrel... looks like 258 on the rear left (non lock ) side. In the flats of the octagon part.
Pulled it like I thought... more info... Dunno what it means at all... but bottom center is WW and at back by tang under is R.S.A. The WW could have something between or tied into them. The R could be a K or H even.
Originally was thinking it was a bored out civil war 58 cal musket..... but may just be pieced together shotgun basically.... .633 bore diameter best I can measure.
Trying to work loads, shoot and have an old collector. Value ideas appreciated. We know if it was a 58 bored out its not worth maybe 300-400 bucks max.
Thanks, Jeff
side of lock 1864, US,AMOSKE....Mfg com, Man.......lr, NH
Barrel has no mark at all on it.
IF its a fowling piece and I need to find a proof mark I"m assuming its the one pin up front by the ?? pewter?? forend cap. Drive out like a TC gun etc...?
Ramrod metal, goes to a point sorta.... convex tip on it for the seater end.
IF its a fowling piece... whtas the value range?
More interesting... forgot I did find a mark on top of the barrel... looks like 258 on the rear left (non lock ) side. In the flats of the octagon part.
Pulled it like I thought... more info... Dunno what it means at all... but bottom center is WW and at back by tang under is R.S.A. The WW could have something between or tied into them. The R could be a K or H even.
Originally was thinking it was a bored out civil war 58 cal musket..... but may just be pieced together shotgun basically.... .633 bore diameter best I can measure.
Trying to work loads, shoot and have an old collector. Value ideas appreciated. We know if it was a 58 bored out its not worth maybe 300-400 bucks max.
Thanks, Jeff
- Ty Davis
- Site Admin
- Posts: 415
- Joined: Fri Apr 11, 2008 7:50 am
- Real Name: Ty Davis
- Patriot Number: 198
- level: Patriot
- Location: Georgia
- Contact:
Re: Help me identify old Musket
Jeff,
Some of our members may be able to give you some information on this gun, but I believe you would be better served at http://www.americanlongrifles.com.
Some of our members may be able to give you some information on this gun, but I believe you would be better served at http://www.americanlongrifles.com.
Ty Davis #198
Factor
GA St. Lt.
Factor
GA St. Lt.
Re: Help me identify old Musket
The trigger guard, lock and rear of the stock indicates this started out as a 58 caliber civil war musket. It was common, after the war, for military muskets to be sporterized like this.
- j.k.stanley
- Posts: 59
- Joined: Wed May 07, 2008 7:51 pm
- Real Name: John K. Stanley
- Patriot Number: 138
- level: Patriot
Re: Help me identify old Musket
There was a surplus store in new york after the civil war that reworked alot of thewe old muskets. It has some resemblences to a springfield. However the lock plate would be marked if that were the case. I would almost think confederate.
You could trace it by the barrel proof marks if you really want to get serious about it. It will take some time and a very knowledgable person to help with that.
Thanks for the view, It is a cool old gun nice find!!
Eggs
You could trace it by the barrel proof marks if you really want to get serious about it. It will take some time and a very knowledgable person to help with that.
Thanks for the view, It is a cool old gun nice find!!
Eggs
- j.k.stanley
- Posts: 59
- Joined: Wed May 07, 2008 7:51 pm
- Real Name: John K. Stanley
- Patriot Number: 138
- level: Patriot
Re: Help me identify old Musket
Sorry meant the lock marks not the barrel marks. do you think the "RSA" could be CSA Confederate States Of America "huzzah"
Eggs
Eggs
Re: Help me identify old Musket
it could be CSA... but the lock is marked US.... captured is possible. Though the first letter looks like a few letters but not so much like a C.
Not that it matters much to me. Now its what is a safe load? 50 grains seems fine so far but I'd feel better pushing that ball with around 70 but we MIGHT find out this coming weekend if lucky.
Not that it matters much to me. Now its what is a safe load? 50 grains seems fine so far but I'd feel better pushing that ball with around 70 but we MIGHT find out this coming weekend if lucky.
- j.k.stanley
- Posts: 59
- Joined: Wed May 07, 2008 7:51 pm
- Real Name: John K. Stanley
- Patriot Number: 138
- level: Patriot
Re: Help me identify old Musket
Without a "competant" gunsmith giving a look see I would no way shoot it. It looks ok in the pics however the breech should be inspected!
Who is online
Users browsing this forum: No registered users and 16 guests